Model 牌号 |
Machine Barrel Temperature 机筒温度 |
Molding Temprature 机头温度 |
TEWR960 | 130-160℃ | 150-170℃ |
试验项目 | 单位 | 技术要求 | |
Density 密度 |
g/cm3 | ≤1.5 | |
Tensile Strength 抗张强度 |
MPa | ≥10.0 | |
Elongation at Break 断裂伸长率 |
% | ≥250 | |
Aging Conditions 老化条件 |
/ | (110±2)℃×240 h | |
Changing rate of Tensile Strength 抗张强度变化率 |
% | ≤±20 | |
Changing Rate if Elongation 断裂伸长率变化率 |
% | ≤±20 | |
High Temperature Pressure Test 高温压力试验(80±2℃) |
% | ≤50 | |
Volume Resistivity of Insulation 绝缘体积电阻率(1kV,20℃) |
Ω·m | ≥1×1012 | |
Brittle Temperature With Low Temperature低温脆化温度 | ℃ | -40 | |
Dielectric Strength 介电强度(1kV,20℃) |
kV/mm | ≥18 | |
HCL gas Evolution 卤酸气体含量测定 |
mg/g | ≤5 | |
PH Value PH值 |
/ | ≥4.3 | |
Conductivity 电导率 |
μS/mm | ≤10 | |
Smoke Density 烟密度 |
No-flame Mode无焰 | % | ≤200 |
Flame Mode 有焰 | % | ≤190 | |
Toxicity Index 毒性指数 |
/ | ≤2.5 | |
Oxygen Index 氧指数 |
% | ≥30 | |
UV-resistant Test 耐紫外线试验 |
h | ≥720 | |
Material Life(90℃) 材料寿命 |
年 | ≥60 |